Store Hours
Monday — Friday
8:00 AM — 5:00 PM
Saturday
Closed
Sunday
Closed
We print DTF (Direct To Film) Transfers, printed HTV, signs, banners, decals and more DTF Transfers, stickers, banners, magent, ready to press, heat press, heat transfer vinyl
Your printed needs source!
DTF (Direct To Film) Transfers are now available!!
Fluorescent colors are not recommended for outdoor use as the Sun's UV rays fade it quickly.
StarCraft Magic Permanent Adhesive Decorative PVC Vinyl Film
Note: Life expectancy can vary depending on harshness of UV exposure.
Due to the stiffness of this film, the sheets will not likely lay entirely flat, they will probably curl up or "hump" when in a stack. DO NOT attempt to roll them the opposite direction and unroll them to get them to lay flat. This can damage the film and also cause it to "tunnel" which is when the film lifts from the release liner and sort of bubbles up. This can be corrected by simply lifting the film gently from the release liner and gently using a squeegee or other flat edge to lay the film back town prior to cutting.
Due to stiffness of the film, smaller intricate cuts may be difficult to weed and work with, as well as have a lower tolerance for lifting from the surface after applied. We do not recommend sharp corners or edges as these may perpetuate peeling from the surface, especially if handled. Likewise, due to the stiffness of the film it is not recommended for textured surfaces. The film will work best if applied to smooth, shiney, clean, and wax-free surface.
Due to the stiffness of the film, when unrolled "tunneling" may occur which is when the film lifts from the release liner and bubbles or "tunnels" form. This can be corrected by simply lifting the film gently from the release liner and gently using a squeegee or other flat edge to lay the film back town prior to cutting.
If by chance we run into an issue with your artwork and you need us to modified a minimum charge of $25 could be added.
If we need to rework the artwork entirely then art time will be charged at a rate of $125 per hour with a 1-hour minimum charge.
The typical turnaround time is 5-7 business days on wholesale items and 10-15 business days on retail items. Always refer to your invoice for your stated turnaround times as they may vary.
For standard shipping, we use USPS First Class, if you would like a faster shipping option please let us know in the notes section of your order.
Due to the nature of our business and customization of products we can not accept returns, If you receive a wrongly printed item please reach out to us ASAP so that we are able to remedy the matter.
Store Hours
Monday — Friday
8:00 AM — 5:00 PM
Saturday
Closed
Sunday
Closed